Everything You Need To Know About Marble Care, Polishing, Shining and Sealing

For most people the effort and time invested in maintaining marble surfaces at their highest appeal is worthwhile, considering their elegant and functional aspect. So what exactly does one need to-do to maintain marble surfaces? What follows is the A to Z of marble surface care.

  • Keeping Marble Surfaces Clean
  • (a) Marble Countertops

    Most solids and liquids in a household or office that end up on a marble surface do not instantly adhere to it. Provided that the potential stain is immediately removed from the surface, there is little else you would need to do to maintain the appeal of a marble countertop. A soft damp cloth should therefore be adequate in wiping off solid and liquid spills. Be careful not to use a wet cloth as such would leave traces of water that eventually get absorbed into the porous marble beneath the surface.

    (b) Marble Floors

    As with marble countertops, most solid and liquid spills can be wiped off without leaving any trace on a marble floor. You only need a dry mop to take care of liquid spills and a trash pan for collecting solids from the floor.

    (c) Marble Bathroom Floor and Walls

    Since marble surfaces in bathrooms are exposed to moisture for prolonged periods, scum inevitably forms on the surfaces. Scrubbing the walls and floor with plain water tends to leave an imperceptible layer of scum. If neglected, the scum ultimately becomes a permanent stain on the marble surfaces. This is why a 10% ammonia solution is more suited for scrubbing bathroom walls and floor. Ammonia not only removes scum completely but it also disinfects the surfaces. See more on tile shops london so you know it all and how it works. read more below.

    1. Removing Stains from Marble Surfaces

    Neglecting solid and liquid spills on marble surfaces causes them to leave stains even after the spills have been dealt with. This occurs because some of the solid or liquid gets adsorbed into the marble which traps the contaminants below the surface. To remove an ingrained stain you would have to prepare a poultice paste by mixing chalk, diatomaceous earth, plaster and a mild non-acidic cleaning agent. You would then apply the paste over the cleaned stained surface. You will then require having to duct tape a plastic sheet over the paste to ensure its gradual drying. Scrapping the paste from the marble surface after 24 hrs guarantees the complete removal of the stain.

    1. Polishing, Shining and Sealing Marble Surfaces

    Marble surfaces gradually lose the reflective quality, an important part of their overall appeal. The rate at which this occurs depends on the function of a particular marble surface. It follows that marble floors are first to exhibit a dull non-reflective surface. Fortunately there is a remedy to this natural tendency which takes the form of a specially formulated polishing powder. While polishing a marble surface, the powder is rigorously rubbed on to a small area of the dull marble surface repeatedly until it reacquires its original shine. This piecemeal process is known as shining a marble tiles surface.


    Sealing a marble surface is recommended if you desire that such surfaces retain their attractive shine for longer periods. Sealing involves introducing a thin layer of wax-based polymer over a marble surface. This layer of sealant protects the marble surface from both mechanical abrasion and the intrusion of liquid or solid spills into the porous marble underneath.

    Tiles on Tile land Facebook page

    Also Tweets about Tiles by Tile Land